Unit 01
Plywood factory
Veneer peeled, dried, hot-pressed and graded — commercial packing grade, interior, flooring, marine and film-faced shuttering plywood, with the specified face and finish.
The industries we serve.
From formwork and marine work to flooring, interiors, doors and export packing. Find the right panels for the way your business works.
6 sectors·IS 710/303·ISPM-15·FOB Cochin
Six sectors · One material partner
Where our wood does its work.
Explore each application, then go straight to the grades and specifications it needs.
01 · Construction & Formwork
Panels that strip clean and come back for the next pour.
Civil contractors and formwork suppliers don't buy a sheet — they buy a number of pours. We make film-faced shuttering plywood in the film weights and thicknesses quoted for repeat use and a fair concrete finish. Specify the form system, load and handling plan so the right panel is confirmed in writing.
02 · Marine & Boatbuilding
A marine specification matched to the intended service.
Boatbuilders and marine fit-out shops need the panel construction and documents stated in the vessel or joinery design. Enquire for IS 710 marine plywood or a BS 1088 requirement, and confirm the applicable evidence before ordering. Hull, deck and structural bulkhead thicknesses must follow the approved design; bond grade alone does not establish assembly suitability.
03 · Flooring & Transport
Floors matched to the load and working surface.
Container repairers, vehicle builders and industrial buyers need floors suited to the load, moisture and surface conditions. We quote container flooring plywood with or without groove and chequered anti-skid plywood with its glue choice stated. Send the floor design and intended use; final suitability is confirmed in the written specification.
04 · Joinery & Interiors
Flat, predictable panels that take a finish.
Joinery firms, furniture clusters and interior contractors need the right construction for each job — and the same board every order. Choose from semi-hardwood, alternate, full red core and premium hardwood plywood, including water-resistant versions, alongside boards and timber. Agree the face, finished tolerance, moisture condition and fixing requirements for the furniture or worktop.
05 · Doors & Shutters
Shutters that hang true and hold a hinge.
Developers and door dealers need a stated door construction, finished tolerance and fixing plan. Choose semi-hardwood or pinewood block-core flush doors and confirm size, lipping, hinge and lock positions, surface finish and inspection requirements on the quote.
Products for this sector
Flush doors & block board
06 · Export Packaging
Packaging that clears customs and protects the cargo.
Exporters, OEMs and 3PLs crating heavy or engineering goods need packaging built to the cargo, not to a catalogue. We build ISPM-15 pallets, plywood boxes and crates and cable drums to your bill of materials. For the panels, ask for commercial plywood (packing grade); an Okoume face can be specified when needed.
Products for this sector
Plywood pallets Plywood boxes & crates Plywood cable drums Commercial plywood (packing grade) Guide: ISPM-15Our factories
The units behind the name.
We are the manufacturer, in timber since 1986. Plywood, sawn timber, packing cases and boards each run on a dedicated floor, all feeding one sales and export desk; sawn timber itself is supplied within India. Your order is made in our factories in Perumbavoor, Kerala; the factory is named on your quote, and you are welcome to visit.
Unit 02
Sawmill
Hardwood logs broken down into sawn timber, runners and battens — sized to the job and seasoned to load, for joinery floors and packing lines alike.
Unit 03
Packing case unit
Boxes, crates, pallets and cable drums built to your bill of materials — solid-wood parts treated and ISPM-15 marked by a DPPQS-registered treatment provider where the destination requires it, and ready to clear customs.
Unit 04
Wooden board factory
Block board, flush doors, finger-joint and particle board — select the construction, finished tolerance and fixing requirements for the intended furniture or door.
Why Cochin Wood
Built to your sector's spec — and your shipping schedule.
Six sectors, one discipline: the right grade, documented for export, shipped on time. Here's what that means in practice.
01
Spec-matched grades
IS 710 BWP for marine, 120 gsm film-faced for formwork, IS 303 BWR for joinery. We quote the grade the job needs — never the nearest substitute.
02
Export-ready as standard
ISPM-15 treatment and marking of solid-wood packing by a DPPQS-registered treatment provider where the destination requires it, a treatment certificate where the quotation states it, a phytosanitary certificate where the destination requires one, FOB / CIF / CFR from Cochin Port. Your container clears customs without surprises.
03
One export desk
A single point of contact from quote to bill of lading — with a written quote and grade recommendation back within one business day.
Application examples
Different uses. Different specifications.
Illustrative requirements to help plan an enquiry. These are not records of completed customer deliveries.
Concrete formwork
Film-faced panels for construction
Send the formwork drawings, panel sizes, surface requirement and support arrangement.
Construction and available sizes confirmed on the quote
Marine
Plywood for a boatyard build
Send the vessel designer's material specification and cutting list. Structural parts must follow the approved boat design.
Panel properties, thickness and documents to specification
Export packaging
Pallets and cable drums for dispatch
Send load details, drawings and destination. Confirm the design and any solid-wood treatment requirements.
Handling, packing and delivery schedule agreed in writing
Tell us your sector
We'll send the right product, the right grade, in writing within one business day.
No call-centre. No chatbot. A real export desk, working from Perumbavoor — same time zone as the people loading your container.